Roborock Saros 10 review: Low-profile robot vacuum with smart mapping and self-cleaning dock
The Roborock Saros 10 robot vacuum cleaner. Picture: Roborock.
Last year, I spent a lot of time with Roborock's flagship Saros Z70 and its clever robotic arm. The new Saros 10 is just as innovative, though it drops that specific arm while keeping almost everything else. It is a masterclass in minimal design, packing serious suction power into a frame that fits almost anywhere in the home.
Available in white or black, the Saros 10 has a stylish, futuristic profile that's neither overtly flashy nor understated. I want plenty of features, but I do not want a machine that takes up half my living room or looks like an eyesore. Roborock has managed to keep the footprint small without sacrificing functionality. I tucked mine into a corner, and it’s barely noticed, as the unit does not sit too high or protrude far enough to become a trip hazard.
Then there is the vacuum itself. At just 7.98 centimetres tall, it is one of the sleekest units I have used. The real bit of magic here is the retractable LDS module. Most robots have a little turret on top that keeps them from going under low furniture, but the Saros 10 can literally pull that module in and flush with the top to achieve its super-low profile. This means it gets under sofas and beds where other robots usually just get stuck. For anyone living in a smaller flat or someone who just hates seeing dust bunnies under the couch, this design is a massive win.
The base station is more than just a parking spot. It houses the clean and dirty water tanks, along with a dust bag tucked beneath to collect debris. One of my favourite additions is the dedicated detergent compartment. I used a Roborock cleaning solution, and because it is so concentrated, you only need a few drops mixed with water. It lasts for ages and makes a noticeable difference in how the floors feel after a mop.
The dock handles the heavy lifting of maintenance, allowing the robot to go back and empty itself in the middle of a session if needed. However, I did notice one slight annoyance during my time with it. While the dock is great at emptying the main bin, if a particularly large piece of debris gets jammed in the vacuum's internal pathway, the robot may not always alert you. I found a few times that it was roaming around pretending to clean, but the bin was actually blocked. It is a good habit to occasionally check the physical bin inside the robot just to make sure everything is flowing correctly.
Under the hood, the Saros 10 is an absolute beast. It boasts 22,000 Pascal units of suction. Whether it is fine dust or larger crumbs, suction power is rarely an issue here.
To keep it from crashing into everything, Roborock has packed in a serious array of sensors. Alongside the retractable LDS module, there is Reactive AI that recognises objects in real time. I was impressed by how it judged distances, cleaning right up to the edge of a table leg before pivoting away without a clumsy bump.
There is also a top contact sensor called the Virta Beam. This works with the retractable module to tell the robot when it is approaching a low clearance, triggering automatic retraction so it can glide underneath. It makes the whole experience feel much more intelligent and less like a random vacuum bouncing off walls.
The Saros 10 features a retractable side mop for handling edges. When the sensors detect a wall or an edge, this side mop rises and extends to ensure the edges of the room are actually cleaned rather than left with a thin strip of dust. The combination of the curved side brush and the extending mop means most hard-to-reach spots are covered without needing a manual touch-up.
The actual cleaning results have been excellent. The Saros 10 can actually raise its entire chassis by up to four centimetres to get over door saddle boards or navigate thicker rugs.
On the underside, the main brush is designed to prevent the nightmare of hair wrap. It scoops everything into the middle and detangles as it goes, sucking the hair straight into the bin. I did not have to spend any time with scissors cutting hair out of the roller, which is a huge relief.
For hard floors, the mopping system uses high-frequency vibration to agitate stains and spills. The mop can be automatically detached at the base station for cleaning and drying, which is a brilliant bit of automation. The only downside here is the noise. Because the vibration system is so active, it creates a humming sound that can be a bit distracting if you are in the room. It is not a deal breaker, but it is something to be aware of if you prefer total silence.
After the first run, which creates a quick and accurate map of your home, you get a full bird 's-eye view of the floor. From here, you can set up spot cleaning or define specific zones that need extra attention.
I really liked the double-mopping option for those stubborn areas where a single pass just isn't enough. You can also toggle whether the mop lifts when it hits a carpet, keeping your rugs dry.
One of the more fun features is the ability to use the vacuum as a roaming camera, letting you check in on things from another room. The app is intuitive and highly rated for a reason, making the Saros 10 feel less like a tool and more like a proper cleaning companion that you can set and forget.
The Roborock Saros 10 is a high-performing robot that proves you do not need a massive footprint to get professional results. While it misses the Z70's arm, its suction and adaptive lift make it an easy recommendation for any modern home.
€1,099 (black), €949 (white) Harvey Norman
CONNECT WITH US TODAY
Be the first to know the latest news and updates
